| Five Tooth Carbide Tip Star |
| • |
Used for grinding, leveling, grooving, cleaning, and preparing concrete
|
| • |
Five-point carbide tips (1-3/4" OD x 5/8" ID) |
| • |
Longer life than steel tooth cutters, average of 6000 to 8000 square feet |
| • |
Maximum cutting rate is 1/8" per pass |
|
|
| Six Tooth Carbide Tip Star |
| • |
Used for grinding, leveling, grooving, cleaning, and preparing concrete |
| • |
Six-point carbide tips (1-7/8" OD x 5/8" ID) |
| • |
Exceptional life, average of 8000 to 10000 square feet |
| • |
Maximum cutting rate is 1/8" per pass
|
|
|
| 18 Tooth Steel Sharp Tooth Cutter |
| • |
Used for general cleaning of concrete or asphalt including removal of paint, epoxy, urethane, adhesive, and heavy dirt, grease and oil deposits
|
| • |
18 tooth hardened steel, (2" OD x 5/8" ID) |
| • |
Average life of 500 to 800 square feet |
| • |
Maximum cutting rate is 1/16" per pass |
|
|
| 12 Tooth Steel Blunt Tooth Cutter |
| • |
Used for paint and oil removal, traffic and shop floor safety-line removal, cleaning and concrete preparation
|
| • |
12 tooth, hardened steel (2" OD x 9/16" ID) |
| • |
Average life of 500 to 800 square feet |
| • |
Maximum cutting rate is 1/16" per pass |
|
|
| Hardened Steel Spacer |
| • |
Used for filing in spaces on BD-SG9 cutter drum |
| • |
1/2" ID hardened steel |
