 |
|
PF10 Power Feed Trim Saw |
|
 |
|
|
|
|
| Interactive image: (210k) |
This precision-built slab/trim saw has a clutch-activated power feed for slabbing that can be used in conjunction with the crossfeed indexing rock vise. Each turn of the cross-feed handle moves the vise 1/16”, with over 2” of cross-feed travel. The vise holds up to 4” of material and can be swung clear for handheld trimming. A toggle switch allows the saw motor to operate independently of the power feed system for manual slabbing or trimming. The power feed system can be set for automatic shutoff.
The PF10 accepts 8", 9" and 10" blades. The 12" x 19-1/2" self-aligning tabletop is easily removable for blade changes, oil filling and tank cleaning. A large coolant tank reduces the need for frequent sludge removal. A 1/3 HP motor drives a heavy-duty 5/8" steel shaft with sealed bearings. Full belt cover is included for operator protection. Baseboard and drain pipe included.
The PF10 comes with a sheet metal table cover to minimize coolant spray outside of the sawing table area. The cover has a clear top for easy viewing. Includes 10" 303C Professional continuous rim blade.
We recommend only using oil as a coolant for this saw. If water is used as a coolant, tank should be drained after each use and a rust inhibitor additive utilized (i.e. Tool Cool or Lube Cool).
|
| PF10 Trim Saw Includes: |
| • |
Clutch-activated power feed with automatic shutoff |
| • |
Built-in crossfeed rock vise |
| • |
10" x .040 303C Professional continuous rim blade |
| • |
Spray cover |
| • |
Motor, baseboard, GFCI & sharpening stick |
| Shipping weight: 105 lbs. |
| Part # 8300036 |
|
| Main Motor |
Baldor |
| Power |
1/3 HP, 110V |
| Amperage |
5.8 Amps |
| Motor RPM |
1725 RPM fixed |
| Arbor Diameter |
1/2" |
| Duty |
Continuous |
| Arbor Bearings |
Ball bearings, permanently sealed |
| Blade Capacity |
8", 9" or 10" diameter |
| Power Feed Motor |
Dayton shaded pole AC gearmotor |
| Horsepower |
1/250 HP |
| Motor Voltage |
110volt/60Hz |
| Motor RPM |
4 RPM (full load) fixed |
| Torque |
18 inch-lbs. |
| Arbor Diameter |
5/16 inch |
| Arbor Bearings |
Sleeve-bushing, permanently sealed |
|
|
| PF10 Trim Saw Without Motor, GFCI, Baseboard |
| Includes 10" x .040 303C Professional continuous rim blade |
| Shipping weight: 75 lbs. |
| Part # 8300035 |
|
|
