These precision built saws are designed for rapid and accurate sawing of exploratory core specimens. The specialty designed 14" segmented diamond blade allows cutting of hard or dense rock samples and engineered materials. The integral core holder provides for rapid and safe cutting of cylindrical core samples. Adjustable height cutting head accommodates specimen sizes between 1" and 5" in diameter.
BD-2000 Series Features:
- Stay level blade guard gives 180º coverage at all times
- Blade shaft is built with sealed, permanently lubricated, heavy-duty bearings
- Cast-aluminum structural components & jig-welded steel frame assembly
- Convenient ON/OFF switch for operator safety
- Recoil spring return cutting head
- Cast aluminum blade guard with stainless steel water tubes that will not bend or rust
- Adjustable water supply for maximum blade protection
- Thermally protected 3 HP Baldor motor on electric saw
- Submersible electric water pump
- Made in the USA
- 208-240V/50 Hz motor available on request
- One-year limited warranty
| Model |
BD-2003E |
BD-2005G |
| Motor |
Baldor (Electric) |
Honda (Gas) |
| Power |
3 HP 230V |
GX160 Cyclone |
| Amperage |
12.5 Amp |
• |
| Motor RPM |
3,450 |
3,600 |
| Blade RPM |
3,100 |
3,550 |
| Blade Capacity |
14" (350mm) |
14" (350mm) |
| Arbor |
1" (25mm) |
1" (25mm) |
| Table Travel |
29" |
29" |
| Max Core Sample Length |
12" |
12" |
| Max. Core Sample Diameter |
5" |
5" |
| Min. Core Sample Diameter |
1" |
1" |
| Weight |
172 lbs. |
191 lbs. |
| LxWxH |
35" x 23" x 29" |
38" x 24" x 39" |
| LxWxH (mm) |
940 x 584 x 737 |
965 x 610 x 991 |
| Part # |
158751 |
166423 |
| Accessories Included with the BD-2000 Series |
| Core Holder |
| 14" BD - 62Q or 62P wet cutting diamond blade (customer's choice) |
| Water Pump |
| Heavy Duty Folding Saw Stand |
|
